Automatic Complete Set Production Line Of Pyrolysis Carbon Black From Waste Tires
Ⅱ. Pyrolysis Carbon Black Production Line
Our pyrolysis carbon black production line implements microcomputer control,
full automatic frequency conversion, negative pressure production and no
pollution, which is an automatic complete set of equipment applicable to the
production of pyrolysis carbon black from waste tires.
l Outstanding advantages.
1、Low
energy consumption: super crushing combines centrifugal crushing, impact
crushing, extrusion crushing in one, energy saving up to 40 ~ 50% than other
types of mechanical crushers.
2,
high fineness: equipped with self-flow classification system, product fineness ≥ 325
mesh. (Raymond mill fineness can only be achieved below 300 mesh)
3,
a large range of feed: feed size ≤ 10mm, the
material only requires a coarse breaking equipment.
4、Low
wear and tear: the crushing part of the wearable parts use composite
wear-resistant new materials, long service life.
5,
high degree of automation, stability, easy to operate.
6,
no adhesive: the granulation process using physical principles, so that the
dust carbon black and water strongly mixed, bonding, without adding any
chemical adhesives.
7,
no dust pollution: The machine is wet, negative pressure, continuous
granulation. There is no dust escaping from the granulation process, and it is
equipped with tail gas dust removal device.
8,
granulation strength: the machine through the high-speed rotation of the
rotating parts with churning teeth to force the powder agglomeration into
spherical particles, compared with natural agglomeration granulation device
(such as rotary disc granulator, drum granulator), has a concentrated particle
size distribution, particle strength greater than the strength of natural
agglomeration particles.
9,
high granulation rate: granulation rate ≥ 90%.
10,
beautiful appearance of the finished product: particle shape is spherical, uniform
size, sphericity ≥ 0.8, particle size is generally in 0.7-1.5mm.
11,
easy to control: the size of the particle diameter can be properly adjusted by
the wet content of the material and the spindle speed.
12,
high efficiency: the whole machine structure is compact, smooth and reliable
operation, large production capacity, granulation 1-1.2 tons per hour (output
has volatile fraction impact)
13、Saving
manpower: high degree of mechanization, saving labor, the whole production
process only requires 4-5 people.
14、Strong
mechanical stability: It can be produced for 24 hours without stopping for a
long time.
15,
covers an area of less: drying using drum drying, double-layer structure, with
a compact structure, covers an area of less than one-half of the same output
single cylinder drying area, reliable work, low energy consumption, high
thermal efficiency
16,
the material drying effect is good, the finished product moisture ≤
2.5%.